What kind of paint for ceiling is the best? Before embarking headlong into the “repainting or painting your ceiling” project, it is important to carefully analyze the condition of the surface.
It will enable you prepare the surface in order to paint properly. Let us look at how to check it.
What Kind of Paint for Ceiling
How to Analyze the Condition of the Surface
New ceiling (plasterboard): You will simply need a suitable undercoat (one coat), and then a ceiling paint.
Cracked ceiling: Fill the cracks with powder or ready-to-use filler, then apply a suitable undercoat, and finally a ceiling paint.
Damaged ceiling: If the paint flakes, simply sand, wash, and apply a suitable undercoat. Then you should apply your special ceiling paint.
Previously painted ceiling: If it is acrylic paint in good condition, a good leaching and application of the paint will be enough. On the other hand, if it is already painted with glycerol paint and you now want to apply water-based paint, you should do the following.
First, you can sand, wash, and then apply an undercoat which can adapt well to the surface. On the other hand, you can wash and apply a special glycerol undercoat.
The correct preparation of the surface is the guarantee of an optimal result. Painting on chipped paint or painting on an unsanded or non-degreased ceiling is not good.
The same case applies to painting on a damp ceiling or with crumbly plaster. Rule number 1, we can never repeat it enough, is to prepare the surface well.
What Kind of Paint for Ceiling?
Glycerol paint, also known as oil paint, is more resistant and more opaque than acrylic paint. However, it remains more harmful to health. That is because it emits toxic agents (VOCs, volatile organic compounds) and is more odorous.
Acrylic paint, also known as water-based paint, smells very little or not at all. It dries much faster and the cleaning of tools is done with water.
The advantage with water is that it is much less restrictive and more ecological than white spirit. Acrylic therefore remains much healthier for you and the environment.
What Finish for a Ceiling Paint
The most common finish chosen for ceilings remains the matt finish. Unlike satin or gloss paint, the matt finish hides defects and roller marks.
Satin or glossy finishes are more washable than matte, but will bring out all the imperfections of your ceiling.
You can however apply a satin finish to a paneled ceiling because it will bring out the charm of the wood.
Which Color To Choose For a Ceiling
The default color of a ceiling remains white, although you can put any color you want.
Be aware that a dark color will darken the room and make the room seem “packed”, and the ceiling will appear lower. On the other hand, white is much brighter and enlarges the room.
What Material to Use to Paint a Ceiling
To avoid tiring your arms, you must first equip yourself with a telescopic pole. Then you should get a good roller adapted to your ceiling. You’ll also need a round brush called a rechamping brush to clear the corners and rechamp them.
Moreover, you will need good quality adhesive masking paper to avoid burrs. In addition, you will need protective tarpaulins to protect the floor and furniture in the room.
You will also need a paint tray to put your paint, and a grid to wring out your roller so you don’t get drops everywhere. Furthermore, it will certainly be useful to have a mixer (manual or to put on a drill) to homogenize your paint.
Also, a painter’s suit, safety glasses, and gloves would not be too much, you never know, small projections or a small accident can quickly happen!
It is advisable to choose a good quality paint, with a high covering power, so that you don’t have to apply more than two coats.
6 Tips Before Painting A Ceiling
To avoid linting, you can pass your roll over the sticky side of a tape. This will remove the excess hair that could come off the first time you use it and make you big pies on your nice ceiling!
Between two coats, put your roll in a plastic bag or in stretch film. It will help you from having to wash it and dry it for the second coat.
You can use what’s called an “S” or “hook” to hang your paint tray from your stepladder, if you don’t use a telescopic pole.
Don’t pull the paint too much as it will lose its opacity and you will make more marks. Also, don’t press too much on the roller, you will certainly make more surfaces but again more marks.
Paint at a temperature between 15 and 25°C, beyond this the paint will dry too quickly.
Start at the edges with the round brush and paint towards the light point of the room. This will allow you to see where you have already passed with your roller and not to forget places.