Do you want to know what is top coat paint? You apply top coat or finishing paint to walls and ceilings just after the undercoat paint. The finishing coat “hides” the last small imperfections of the surfaces, and makes it possible to achieve the perfect final result (appearance, color).
Now, you can decorate your interior, give it a new shine and youthfulness, while purifying the atmosphere of your home, using finishing paint! Thanks to its technology, finishing paint continuously purifies and depollutes the indoor air.
And because it has bio-sourced components, it makes a positive contribution to environmental protection. Keep in mind you apply finishing paint to decorate the surface.
What Is Top Coat Paint
On Which Surface Should You Apply Finishing Paint?
You can apply it on healthy, clean, and dry surfaces, such as:
- Plasterboard
- Plasters
- Coatings
- Glass cloth
- Cellulose wallpaper
Before starting your painting work, make sure you open the jar carefully with a suitable utensil. Then, you should mix the paint well in order to resuspend the elements that have been set in suspension during storage.
Equipment to Use to Apply The Finishing Paint
You can apply finishing paint with a brush, roller, or spray gun.
The equipment must be clean and in good condition; cleaning with water at the end of the work is sufficient.
What Is Top Coat Paint – Professional Tips For Preparing The Room To Paint
The preparation of the room in which the painting work is going to take place must include removal of furniture and other belongings.
The preparation of the room is an important step to avoid inconveniences and accidents.
Our Professional Advice:
- Get rid of furniture and decorative objects in the room you want to paint
- Place furniture that cannot be removed in the center of the work area and protect it with plastic sheeting fixed to the floor to prevent it from falling
- Remove walls paintings, frames, wall decorations, nails, screws and dowels
- Remove curtains, blinds, rods and fasteners
- Dust the walls and sweep the floors so that no particles stick to the finishing paint
- Remove or protect door handles, electrical sockets and covers (preferably, by an electrician, otherwise it is essential to cut off the power supply to the electrical panel)
- Cover baseboards, window, and door frames
- Cover floors and fixing tarpaulins with adhesive
- Evacuate all the equipment and other supplies you don’t need
- Before starting to paint the surfaces, it is very important to protect yourself with gloves, goggles and protective masks
- The room must be clean and ventilated
How to Repair a Wall before Painting It
For a good hanging of the paint, the surface to paint or repaint must be clean, dry, smooth, and healthy.
Depending on the condition of the ceiling or wall, the preparations before applying the finishing paint are not the same.
Before starting to wash the surfaces to paint, it is imperative to cut off the electricity, protect yourself with (gloves, glasses, masks), and ventilate the room.
Preparing a Wall with Roughnesses
The surface to paint must be smooth. You must scrap unevenness, irregularities, and stains with a spatula or sandpaper (fine grit 120). Be careful not to make new marks in the wall with the spatula.
Dust, wash, and rinse the wall.
Prepare a Wall with Holes
Before painting, you must fill the small holes with a filler: Fill the hole, smooth with a plastering knife, allow to dry, and sand with fine sandpaper.
When the holes are large and deep, you must fill them with a filling plaster. Then, allow them to dry for at least 1 hour, then apply a smoothing plaster with a plastering knife. You should then sand with very fine abrasive paper (150).
Preparing a Wall with Crevices and Cracks
Plugging cracks is an equally important step. You should enlarge the crack with a triangular scraper to remove the dead plaster and any loose parts.
Dust off the dust and apply a filling plaster with a plastering knife (in the direction of the crack and then perpendicularly). Smooth with a plastering knife. Then, apply a calico the length of the crack to the still fresh plaster. The next step is to apply a new layer of filler.
Allow to dry and sand with fine abrasive paper. Then,dust with a damp sponge and repeat the operation.
What Happens After The Repairs? Apply An Undercoat!
Primer paint, also known as primer or undercoat, is a paint that you should apply before the finishing paint. It acts as an intermediary between the repaired surface and the decorative paint: it prepares it to receive the finishing paint.
What Is Top Coat Paint
Manufacturers offer a range of professional-quality finishing paints: whether biosourced or biosourced and sanitizing. Each one offers 3 levels of finish for warm, modern paints that are easy to match in interior decoration because they are not very reflective:
Matte finish: The paint does not reflect light and better masks the defects of the surface.
Velvet finish: The paint reflects some light.
Satin finish: The paint reflects the light.
The aspect of the paint chosen contributes to the atmosphere of the room.
Can You Paint A Ceiling With A Mural?
You cannot paint all surfaces with the same paints and in the same way. Therefore, you cannot systematically paint the walls of the room and the ceiling if some surfaces are made of wood and others of plasterboard.
It will then be necessary to check that the paint is suitable for both types of surfaces, or buy two different types of paint. If walls and ceilings have the same type of surface, in this case only one type of paint may suffice.
The biosourced finishing paint is suitable and applicable on plasterboard, plasterboard, glass cloth, concrete, cement or wood.
Conclusion – What Is Top Coat Paint
What luck! Whatever your room, finishing paint will clean up, depollute, your living space!
The use of the room can help you determine whether a matt or velvet, satin finish is more suitable for a particular area:
Kitchen, bathroom, and toilet: You should a resistant paint, therefore a satin or glossy finish.
Entrance hall, corridors, and stairs, children’s rooms (many passages and risks of dirt or rubbing): You can use a velvet or satin finish paint.
Baby’s room and adult’s room: Consider a matte finish paint.
Lounge, living room, dining room, office: It is best to use a matt painting.
